T-Post Feeder Instructions
Tools needed:
- 7/16 socket or cordless drill
What to buy:
4x 7 ft. Studded T-Post – These will be the legs of the feeder. Available at your local hardware or feed store
Building Your Feeder
- Select a flat and stable area for your new feeder and unpack your hardware kit
- Using the provided 60-inch measuring strip in the hardware kit, measure from under the top cleat down the 7-foot T-Post and mark it with one of the four red stickers
- Repeat the previous step for the other 3 T-Posts
- Loosely start the 8 black brackets to the feeder and secure with one bolt per bracket to ease installation
- Place feeder on the ground with the front in the desired position
- Drive all (4) T-Posts into the ground until they reach the 60-inch mark. If necessary, adjust the T-Posts by driving deeper until the tops of all 4 are level with each other.
- Once T-Posts are driven, raise the feeder and install retaining brackets as shown
Congratulations! Your Feeder is Now Complete!
